Spiral door
Product description:
High speed spiral doors are suitable for installation in industrial buildings, factories, warehouses, workshops, garages and other industrial equipment exits. The new arc-shaped turbine and tensioning torque balance technology can ensure a stable operation of the door body, easily can be operated by one person.
Installation Site
4 Advantages of High Speed Spiral Door
1. 0.7mm thick double-layer aluminum alloy door panel, filled with high-density polyurethane foam in the middle, the total thickness of the door panel is 40mm with a volume density of 250kg per cubic meter, and the heat insulation structure is designed.
2. The four-fold sealing structure technology ensures the airtightness and isolation effect inside and outside the door, and the airtightness is 8.68m³/(㎡xh).
3. The integrated transmission system of the pulley and the track balance mechanism enables the door to run lightly, smoothly and quickly.
4. Using a dedicated servo system, the core is a DSP processing chip, the system can precisely control the operation of the door body, and the standard infrared safety anti-pinch device.
A Variety of Curtain Colors Can Choose
Technical Parameters
Features
Suitable for outdoor doors that are frequently opened and closed, with functions such as fast speed, strong wind resistance, and good thermal insulation performance
Door Curtain Material
0.7mm aluminum alloy door panel, filled with polyurethane foam for heat preservation inside, and the thickness of the door panel is 42mm
Door Frame Material
2.5mm galvanized steel paint frame
Control System
Standard microcomputer control system\Open, Close, Stop buttons\Switch man-machine English interface\LCD display, fault code prompt
Security System
Photoelectric protection (standard configuration) \Wireless safety bottom edge protection (standard)\Grating protection (optional)
Drive System
Servo motor, reducer
Motor Position
Default right
Wind Resistance level
11 winds (national standard)
Maximum Speed
2.0m/s
Emergency Door Opening
Support
High Speed Spiral Door Details
①Door panel ②Transparent window ③Track ④Servo drive motor ⑤Control box
Installation Requirements
All measurements are made indoors, and each value must be measured at least three points:
H–the height of the doorway (the distance from the ground to the top of the doorway)
B–the width of the door opening (the distance from the left edge of the door opening to the right edge)
h–Above the doorway (the distance from the top of the doorway to the ceiling) is generally reserved 900mm
b1/ b2 is the left/right lateral distance of at least 350 mm (distance from the corresponding edge of the door opening to the obstacle)
L is the depth of the room.
When measuring h, b1, b2 and L, take the smallest value as the final size.
Basic Cofiguration
Other Configuration
Matters Needing Attention
1. The door body parts run smoothly along the track, and the door body itself remains balanced, that is, their weight should be compensated by the torque of the spring.
2. Make sure that people and objects are not within the lowering range of the door body during the operation.
3. It is strictly forbidden to move below when the door is closed, because it will cause damage.
4. When the spiral door is opened and closed, do not impact the door body or interfere with its normal operation.
5. Do not pollute the guide rails and pulleys, as it may cause smooth operation.
6. Make sure that there are no foreign objects and debris in the track during operation, which may cause the door to tilt and get stuck.
Notice! If abnormalities are detected, stop operation immediately.
Project Cases
